I pulled the stock of my 'new-to-me' Mannlicher with the hope of dating the gun. (I was surprised to find that a comprehensive code of serial numbers and dates did not exist for the commercial sporters, but hoped I'd find an internal date on the gun.) I knew the gun was post-1912 based on the proofs. The name on the scope (Emil Kerner & Sohn) provided another clue as the '& Sohne' nomenclature first shows up in the mid-1920s. The serial number on the gun is 9857 and the serial number on the scope is 6581. (This is an original M-S in 6.5x54 with the original Zeiss Zeilvier 4x scope in claw mounts. ) Once I got the gun apart I did not find the date code (or at least the date code in the form I expected to find it.) Stamped in two spots on the underside of the action were the numbers '14037*.19.'
I am not sure how to interpret that code. Anyone have any insight? Below are a few photos of the gun: #222446 - 03/20/11 11:34 PM Re: 1903 Mannlicher-Schoenauer - Dates [] Sidelock Registered: 12/31/01 Posts: 6881 Loc: Alaska. Based on the serial number and location of the markings on the scope it was made in 1923 or early 1924, so was added by Kerner a few years after the rifle was made. Zeiss production records were destroyed during the war, but collectors of German sniper rifles have reassembled most of the major model transitions and serial number sequences. Mifare Crack. Beautiful little rifle, by the way.
I may have a sling or two that would be appropriate for it; I'll take a look in my gun room to see what I have available. Edited by Peconga ( 03/24/11 03:34 PM) #222981 - 03/24/11 04:44 PM Re: 1903 Mannlicher-Schoenauer - Dates [] Boxlock Registered: 06/14/10 Posts: 21. Updated every minute of everyday! Copyright (c) 1993 - 2017 doublegunshop.com. All rights reserved. Doublegunshop.com - Bloomfield, NY 14469.
USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. Doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED 'AS IS' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. Doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials.
Mannlicher Schoenauer MCA. The serial number is 58xxx. As for the numbers imported, I really do not have a clue.
Doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. Doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. Doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk. Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.
I would appreciate any help on my Mannlicher 1903 rifle. I think at least to me there are special factory extras on this rifle. It has a popup tang sight and a rear sight with five folding leaf sights.
The front sight has a spring cover that folds over and with a finger nail you lift up the sight post. The stock shows quite a bit of wear but no cracks. The stock and barrel have the same 4 diget serial number. The bore shows strong rifleing. If I have the stock refinished does the rifle lose value? If I decide to sell it what would the range of value be. Link to the Mannlicher photos is included here Thanks for your help.
I would not refinish the rifle.leave it alone just clean it up and do that carefully.what caliber is this one? If it is 6.5 x54mm then brass will have to either be fabricated or you will have to pay big bucks for it.
Buying 6.5 x54mm loaded ammo is next to impossible in the US. Of course, it could be anyone of a dozen other chamberings. I have seen several rifles of this vintage and all had similar accessories.In addition to the flip up tang sight, there was a striker sight that was common. Hi Booba I have a rifle that is very similar to yours although without as many extras.
As far as I'm aware, it is the take-down version of the Model 1903 M-S rifle. Mine is in 6.5x54. When I've worked out how to post pictures I'll show it to you. I can't tell from the photos but I assume the front sight on your rifle can be switched between a standard post and the ivory insert, which is intended for dim light or night shooting. I don't have that feature on mine, or the multi-leaf express sights (just two), or the opening horn cap on the pistol grip. I do however have the retractable peep and the trap in the butt stock etc.
I would think long and hard before I launched into a serious clean-up operation. If you decide to steam some of the dents and gouges from the stock you will have to completely refinish it. The steaming will raise the grain so the surrounding wood will have to be sanded back to get a smooth finish. If you decide to do that I'd just hand rub it with linseed oil. This has to be done slowly using very small amounts of oil each time, and rubbed into the wood until it completely disappears.
However, although very labour intensive, the end result is very attractive. A proper job would take months to complete. If you have a competent firearms restorer in your area it may be a good idea to discuss your options with him. If you do refinish the stock you will probably have to get the checkering re-cut (otherwise it will look odd). Don't attempt this yourself unless you really know what you're doing. Generally speaking its a job for a professional.
Although I understand the reservations expressed by some, I dont think these rifles are so rare that they shouldn't be restored and shot. The important thing is that any work is done properly! So, think about the options carefully before you take the plunge. Igi 1 Game Free Download For Windows 7 64 Bit.